SC875 5″ Touchscreen Baby Monitor + BONUS HFS1000 Non-Contact Thermometer

The Secure875 can connect up to 4 camera units (CU875) to the one parent unit. The original unit is supplied with one camera. Additional cameras can be purchased from our online store or from your local baby store.

Check that both the parent unit and baby unit are turned on. Check that the parent unit is charged or placed on charge. Check that the baby unit is connected to the correct supplied power adaptor. Failing this, please contact Oricom Support on 1300 889 785 Mon-Fri 8am-6pm AEST, or email support@oricom.com.au.

Move the parent unit closer to the baby unit. Try resetting your monitor to avoid busy channels:
1. Turn both camera and parent units off and remove the battery in the parent unit. Leave unplugged for 20 seconds.
2. If you have Wi-Fi in the home, make it busy by streaming a video on YouTube or similar.
3. Turn the camera back on wait for 30 seconds.
4. Plug the battery into the parent unit and turn on.
If the display is still beeping, please delete and re-pair the camera as instructed on page 12 of the User Guide. When pairing it is best to keep the camera and parent units close together (within 1m) and keep clear of all other electronic devices including mobile phones, tablets or computers.

Increase the distance between the parent unit and baby unit. Reduce the volume on the parent unit.

Check the battery is connected to the battery connection in the battery compartment. After a period of time, the battery may need to be replaced due to everyday usage. Please find the part under the accessories tab on the Secure875 Product Page.

Depending on the usage, the parent unit will work for up to 8 hours on a fully charged battery with power save turned ON. When the battery charge becomes low on the parent unit, the battery icon will turn red. At this point, you need to charge the parent unit. The rechargeable battery pack (supplied) can be charged and discharged hundreds of times, however it will eventually wear out and lose its ability to hold a full charge. When the in-use time becomes noticeably shorter than normal, it is time to purchase a new battery pack.

Select the HFS1000 to body temperature measuring mode, and check the body temperature on the temple area from 2 to 3 cm distance.

Select the thermometer to daily wide temperature measuring mode, and check the water temperature by
holding the thermometer 2 to 3 cm from the water. Be careful not to get water on the thermometer.