X

         

More Than 20 Years of Experience

5M Aussies Trust & Use Oricom

Proven Track Record of Quality

02SD Digital Bath and Room Thermometer-Duck

$22.95

Digital Bath and Room Thermometer with Temperature Alert The Oricom Digital Bath and Room Thermometer is designed to monitor the temperature of baby’s bath or bedroom and to use as a fun toy for babies of all ages.

200 in stock

  • Displays accurate temperature reading of bath or room
  • Floats in water
  • Fun and easy to use
  • LED light illuminates when water temperature is 39°C or over
  • Automatic switch-off after one 30mins
  • Displays water temperature 0°C °to 50°C
  • Requires 2 LR44 batteries, supplied

Product contains button battery/(ies).

WARNING - KEEP BUTTON BATTERIES OUT OF REACH OF CHILDREN

  • Button/coin cell batteries are hazardous and must be kept out of reach of children at all times, whether the battery is new or used.
  • If it is suspected a button/coin cell battery has been swallowed or placed inside any part of the body, seek medical attention immediately or contact the Australian Poisons Information Centre on 131126 for 24/7 fast, expert advice. These batteries can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body.
  • Regularly examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
  • Dispose of used button batteries immediately and safely out of the reach of children. A battery can still be dangerous even when it can no longer operate the device.
  • Tell others about the risk associated with button batteries and how to keep their children safe.
Download Spec Sheet
Download User Guide

AUSTRALIA'S MOST TRUSTED BRAND

Trusted by over 500,000 Parents

As Australia’s local specialist in Baby Care, at Oricom we focus on developing products led by real life needs that should simply be an extension of the care you naturally show your baby.

DELIVERING TRUE PEACE OF MIND

The Next Level of Care

Several of our products are included as medical devices on the Australian Register of Therapeutic Goods (TGA) and we go the extra mile in technical product compliance as well as ethical sourcing.

Related Products

Secure740 Digital Video Baby Monitor (SC740)

$129.00

02SCR Digital Bath and Room Thermometer-Crocodile

$22.95

HFS1000 Non-Contact Infrared Thermometer

$89.95

FS300 Non-Contact Infrared Thermometer

$69.95

Using your Oricom Bath or Room Thermometer Ideal bathwater temperatures should be between 36.5°C and 38°C.
A temperature higher than 39°C may cause scalds or burns.
• This thermometer measures water temperature between 0°C and 50°C.
• To activate, press the “on/set” button on the underside of the unit or place in water for automatic turn on.
• Wait 10 seconds, the digital screen will display temperature when the thermometer is on and ready for operation.
• Place the thermometer in bath water as the tub is being filled. Mix the water thoroughly whilst taking the temperature.
• Temperature alert function – LED light illuminates when water temperature is 39°C or over.
• Auto shut-off after 30 mins to save battery power.
• The thermometer will continue to re-check and adjust to show ambient room and water temperature every 10 seconds when turned on.

Press the “C/F” button on the underside of the unit to change from Celsius to Fahrenheit (Default setting is Celsius).

High temperature alert is preset to 39°C, but you can choose to change the setting between 37-40°C. Press and hold “on/set” button on underside of unit for 2 seconds. Press “+” button to set the desired alert temperature. If water temperature is above the high temperature setting a RED light will flash. A green light will flash when water is below 30°C. NOTE: This feature is only functional when thermometer is in the water.

– If the unit will not turn on, the batteries will need replacing.
– If you’re changing a button battery, ensure it is changed on a surface out of reach of children. Make sure the battery cover is secure, so your child can’t remove it. Store button batteries like you would any medication – out of reach of children.
– NOTE: When replacing the batteries keep all items including the old batteries, screw, “O” ring and cover, out of reach of children as these items may cause a choking hazard.
– The batteries can be accessed by removing the screw on the underside of the thermometer and then turning the cover in an anti-clockwise direction, a quarter turn, until it is loose.
– Carefully remove the batteries and insert 2 new LR44 batteries with the markings face up. Note: Do not mix old and new batteries or different brands of batteries
– Please ensure the white rubber “O” ring is inserted correctly, replace the cover turning clockwise a quarter turn and secure the screw into place. Do not short-out connecting terminals whilst changing batteries
CAUTION: This product is only to be used in water when assembled and operated in accordance with the instructions. If the battery cover is not fitted correctly then the seal will not be water proof and water will enter the product and result in damage.

There are no video guides for this product at the moment. Please contact us if you have any questions.

How do I use the digital bath and room thermometer?

Using your Oricom Bath or Room Thermometer Ideal bathwater temperatures should be between 36.5°C and 38°C.
A temperature higher than 39°C may cause scalds or burns.
• This thermometer measures water temperature between 0°C and 50°C.
• To activate, press the “on/set” button on the underside of the unit or place in water for automatic turn on.
• Wait 10 seconds, the digital screen will display temperature when the thermometer is on and ready for operation.
• Place the thermometer in bath water as the tub is being filled. Mix the water thoroughly whilst taking the temperature.
• Temperature alert function – LED light illuminates when water temperature is 39°C or over.
• Auto shut-off after 30 mins to save battery power.
• The thermometer will continue to re-check and adjust to show ambient room and water temperature every 10 seconds when turned on.

How do I change from Celsius to Fahrenheit?

Press the “C/F” button on the underside of the unit to change from Celsius to Fahrenheit (Default setting is Celsius).

How do I change the High Temperature Alert settings?

High temperature alert is preset to 39°C, but you can choose to change the setting between 37-40°C. Press and hold “on/set” button on underside of unit for 2 seconds. Press “+” button to set the desired alert temperature. If water temperature is above the high temperature setting a RED light will flash. A green light will flash when water is below 30°C. NOTE: This feature is only functional when thermometer is in the water.

How do I replace the batteries?

– If the unit will not turn on, the batteries will need replacing.
– If you’re changing a button battery, ensure it is changed on a surface out of reach of children. Make sure the battery cover is secure, so your child can’t remove it. Store button batteries like you would any medication – out of reach of children.
– NOTE: When replacing the batteries keep all items including the old batteries, screw, “O” ring and cover, out of reach of children as these items may cause a choking hazard.
– The batteries can be accessed by removing the screw on the underside of the thermometer and then turning the cover in an anti-clockwise direction, a quarter turn, until it is loose.
– Carefully remove the batteries and insert 2 new LR44 batteries with the markings face up. Note: Do not mix old and new batteries or different brands of batteries
– Please ensure the white rubber “O” ring is inserted correctly, replace the cover turning clockwise a quarter turn and secure the screw into place. Do not short-out connecting terminals whilst changing batteries
CAUTION: This product is only to be used in water when assembled and operated in accordance with the instructions. If the battery cover is not fitted correctly then the seal will not be water proof and water will enter the product and result in damage.

There are no video guides for this product at the moment. Please contact us if you have any questions.

Proudly Protecting our Environment

We are proud to be a signatory of the Australian Packaging Covenant, a unique initiative between government, industry and community, set up to divert packaging waste from landfill.

Need Support?

Find the answers to your questions here

Oricom VIP Club

Join the Oricom Family and receive 10% off your first order*

*Excludes Promotional Items

Oricom-VIP-Program

Join the Oricom Family and receive

10% OFF YOUR FIRST ORDER*

*Excludes Promotional Products