- 80 Narrowband channels*
- 5 watt (max TX power)
- Ultra compact micro size
- 7 colour backlit display
- Flip LCD function
- Automatic Level Control (ALC) for consistant audio levels
- 38 CTCSS and 104 DCS
- Duplex* (range extender)
- Open/Group Scan
- Digital squelch control
- Busy channel lockout
- 5 year warranty on UHF300
ANU200 Key Features:
- Pre-tuned to UHF CB frequency
- Ground independent
- Fiberglass whip
- Elevated feed with heavy duty spring
- Antenna length 950mm
- Includes 3.8 metres RG58 coax cable, pre-terminated FME connector and PL259 connector
- Great all round performer, ideal for off road and diesel engines
BR100 “Z” antenna bracket for boot or bonnet mount.
*This 80 channel narrowband radio has a total of 75 useable voice channels Channels 22 and 23 are used for Telemetry and Telecommand, voice communications are not allowed on these channels. Channels 61,62 and 63 are guard channels and are not available for use.
Q. What are the black rubber washers for?
A. The black rubber washers are to be placed between the radio and mounting bracket to provide resistance to movement but still allow the position of the radio to be adjusted.
Q. I am transmitting on my radio and the other party can’t hear me
A. If you are using channels 1 to 8 or 41 to 48 you could be transmitting in Duplex mode, turn DPX off or move to another channel
Q. How do I set the priority channel
A. To set the priority channel, select the channel you wish to use as the priority channel using the rotary channel select knob then press the menu button 4 times or until you see “PrI” on the display then turn channel select knob to select ‘on’ push and hold the menu button to save the setting When you briefly push the “ins” button on the microphone the priority channel is selected
Q.What is CTCSS?
A. CTCSS, or Continuous Tone Coded Squelching System, is an option that allows your UHF radio(s) to only pick up radio signals preceded by a “code”. This option helps to cut down on unwanted radio chatter. This is also known as PL, Private Line, Channel Guard, etc.
Q. If the UHF Radio does not switch on at all
A. Check the power lead (wire harness) and fuse.
Q. What is the range of the UHF radio?
A. The type of antenna you use and where it is mounted on your vehicle will affect the range. A Low gain antenna will give you less range but wider coverage. A high gain antenna will give you greater range but it produces a narrower field which is more directional. Mounting the antenna low on the vehicle will shield the transmission in the directions close to the vehicle, so ideally the antenna needs to be mounted as high as possible.
Q. How far does a UHF radio transmit?
A. Many factors affect how far a UHFradio will transmit including power of the radio and the environment in which it’s used (e.g. buildings, mountainous and surrounding vegetation can cause range problems).
Q. What is a Repeater?
A. A Repeater is a Radio Relay Station. It is used when the radio signal needs to be magnified to get the desired distance coverage. It works by receiving a radio signal from one unit, magnifying it and retransmitting the signal to another radio unit. It would be used in an area where coverage was hindered by terrain, buildings or other environmental conditions.
Q. Where are the repeater stations located?
A. There is a list of repeater stations across Australia. This list and the operational status of the repeaters can change so please check with the ACMA for the latest information on repeaters.