- 40 channels
Allows you to choose from 40 transmission frequencies (38 voice) to transmit or receive messages.
- 5 Watt Maximum TX Output Power
Maximum transmit power for best possible range.
- Duplex (Range Extender) Capability
Local repeater stations rrea. This extends the effective range of the radio, giving you the greater reach.
- 38 interference eliminator codes (CTCSS)
Block out any unwanted conversations
- Open/Group/Priority scanning
Gives you the option to scan all channels in memory and lock on any active channels or to select the channels you wish to monitor/listen to in a group, along with a priority channel (priority watch).
- Large easy to read LCD display
The keypypad and Liquid Crystal Display (LCD) is backlit for easy viewing at night or in low light situations.
- Rotary Squelch Control
Gives you the ability to manually tune your radio to receive the best sound quality for your local environment.
- DIN Mounting Kit (not supplied)
Allows you to flush mount your radio in a standard vehicle DIN. This may be purchased from the dealer where you purchased the radio or directly from Oricom.
1 x UHF050 Radio
1 x Microphone
1 x Mounting Bracket
1 x wiring harness
1 x Microphone holder
Q. What is the range of the radio?
A. The range will depend on a few things. The type of antenna you use and where it is mounted on the vehicle will affect the range. Low gain antenna will give you less range but wider coverage, A high gain antenna will give you greater range but it is produces a narrower field which is more directional. Mounting the antenna low on the vehicle will shield the transmission in the directions close to the vehicle, so ideally the antenna needs to be mounted as high and as possible.
Q. When I am receiving a transmission, the display shows that I am receiving a signal but I cannot hear anything, why?
A. Firstly check, your volume control, then if you still cannot hear the transmission, check to see if you have a CTCSS or DCS code set on that channel, if you do you will only be able to hear transmissions from other radios that have that same code set. If you turn off any CTCSS or DCS codes you will be able to hear all transmissions on that channel.
Q. When I am transmitting the person I am transmitting to cannot hear me, why?
A. Check that you are both on the same channel and both have the same CTCSS or DCS codes set. Also check that if you have duplex mode enabled that the other party has duplex enabled also.
Without the DIN kit
Height : 4cm
Length : 12cm
With the (optional) DIN kit attached to the radio
Height : 5.5cm