- Adjustable ringer volume
- Mute function
- Last number redial
- Wall mountable
- 12 month warranty
TP4 Trimline Phone
The Oricom TP4 corded phone is simple in form and function, a practical desk or wall phone with all you need for everyday use.
The TP4 would be a stylish addition to any home or office.
Where to buy
Q. Will I have to get a new phone handset if I connect to the nbn™ network?
A. All Oricom phones supplied for the past 10 years will work. Any other brand of phone should work over an NBN™ fixed line service unless it is a very old rotary dial or pulse dial-based phone.
Q. I will be switching to the nbn™ soon will Oricom phones work with the nbn™?
A. Yes, all Oricom corded and cordless phones will work when connected to the nbn™ Connection box.
Q. If power fails to my home and I am connected to the nbn™ will my Oricom corded phone work?
A. Please contact your NBN provider as you may be able to request an (optional) backup battery, this will provide approx. 5 hours of power. PLEASE NOTE: This is depending on the NBN connection type you have installed in your home.
Q. If power fails to my home and I am connected to the nbn™ will my Oricom cordless phone work?
A. No, the cordless phone will not work as they require mains power to the cordless phone base to work.
Q. So, if I have not requested the nbn™ to install the battery back option my Oricom corded phone and or Oricom cordless phone won’t work if the mains power fails, how will I be able to make phone calls?
A. If you are faced with this scenario, you will need to use a mobile phone, assuming it is charged and in a mobile reception area.
Q. Will all existing phone sockets in my home work with the nbn™?
A. In most cases you will be able to plug a compatible existing phone handset or cordless base station directly into the NBN™ connection box (NTD) “UNI-V” phone port or an Analogue Telephone Adaptor provided by your phone service provider. Ask your preferred phone service provider which port to plug your devices into. Your phone may need a converter or a new cable if it has an old connector plug and your service provider will be able to confirm this. When the service provider technician has completed the installation, and reconnected your phones to the connection box, check that you telephone service is working correctly before he leaves your home.
Q. How do install the 9V battery?
A. – Before installing or changing the battery make sure that the telephone is not connected to the telephone network or the mains power supply. – Install a new 9 volt alkaline battery. – Replace the battery door.
Q. How do I set the product up?
A. – Connect one end of the phone line cord to the back of the unit (1) and the other end to the double adaptor plug.
– Plug the double adaptor into the telephone wall socket.
– Connect the AC adaptor to the socket (4) on the back of the unit.
– Plug the AC adaptor to the power socket on the wall.
– Plug in the shaker to the back of the unit.
Q. How do I set the time?
A. – Press and hold (set clock) button.
– Press H (hour) and M (minute) until correct hour and minutes appear on the display.
– Release (set clock) button.
– For p.m. hours, the p.m. indicator will appear on the display near the inscription PM.
Q. How do I set the alarm time?
A. – Press and hold (set alarm) button.
– Press H (hour) or M (minute) until correct hour and minutes appear on the display.
– Release (set alarm) button.
– Press (set alarm), H and M to reset the alarm clock to 12.
Q. How do I switch the alarm off?
A. Press the alarm off button (OFF), the alarm will them operate at the same time the next day. The alarm if not switched off will continue to sound for up to 2 hours and then be automatically switched off.
Q. How do I use this model with my telephone?
A. Ensure that your telephone is connected to the WNS1 as shown in the installation section. Select the ringer On/Off switch on the A+T or T position for the ring. Choose which of the alarm modes you wish to alert you of your incoming telephone calls (see page 5: V, V+S, S+F or F+V) When the alarm mode selected indicates there is an incoming telephone call, lift the telephone handset and answer the call. When you have finished the call replace the handset and the alarm will be ready to indicate the next call.
Q. How do I clean and care for this product?
A. The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never use cleaning agents,particularly aggressive solvents. Apart from occasional cleaning of the case, no other care is necessary. The rubber feet on the base are not resistant to all cleaning agents. The rubber feet do not normally leave any marks on the surface. However, on account of the multitude of varnishes and surface finishes used, surface marks caused by the feet of the unit cannot be ruled out.