Secure895 5″ Digital Video Baby Monitor with Motion Tracking (SC895)

The Secure895 can connect up to 4 camera units (CU895) to the one parent unit. The original unit is supplied with one camera. Additional cameras can be purchased from our online store or from your local baby store.

Check that both the parent unit and baby unit are turned on. Check that the parent unit is charged, or placed on charge. Check that the baby unit is connected to the correct supplied power adaptor. Failing this, please contact Oricom Support on 1300 889 785 Mon-Fri 8am-6pm AEST, or email support@oricom.com.au.

Move the parent unit closer to the baby unit. Try resetting your monitor to avoid busy channels: 1. Turn both camera and parent units off and remove the battery in the parent unit. Leave unplugged for 20 seconds. 2. If you have Wi-Fi in the home, make it busy by streaming a video on YouTube or similar. 3. Turn the camera back on wait for 30 seconds. 4. Plug the battery into the parent unit and turn on. If the display is still showing “Link Lost”, please delete and re-pair the camera as instructed on page 10 of the User Guide. When pairing it is best to keep the camera and parent units close together (within 1m) and keep clear of all other electronic devices including mobile phones, tablets or computers.

Increase the distance between the parent unit and baby unit. Reduce the volume on the parent unit.

Check the battery is connected to the battery connection in the battery compartment. After a period of time, the battery may need to be replaced due to everyday usage. Please find the part under the accessories tab on the Secure895 Product Page.

To get the best performance, place your baby unit between one and two metres away from your baby. Point the baby unit towards the baby or object you want to monitor. Check that the baby or object is suitably displayed on the parent unit screen.

Depending on the usage, the parent unit will work for up to 8 hours on a fully charged battery with power save turned ON. When the battery charge becomes low on the parent unit, the battery icon will turn red. At this point, you need to charge the parent unit.The rechargeable battery pack (supplied) can be charged and discharged hundreds of times, however it will eventually wear out and lose its ability to hold a full charge. When the in-use time becomes noticeably shorter than normal, it is time to purchase a new battery pack.

Press MENU button:
1) Select the Lullabies icon. Press “OK’’ button to confirm.
2) Choose the lullaby to play from lullabies list. It will automatically single cycle once you chose a lullaby.

Note: If you chose ALL, it will automatically repeat all lullabies on the list.

Press MENU button
1) Select Auto Tracking icon.
2) Press “ON/OFF’’ to enable/disable this function.
3) With Auto tracking turned on, the camera will automatically follow the movement of an object or person in its sight.